Overview

Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.

Features

• Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
• Vibration resistant electronic drive circuit.
• Regulated by three-wire proportional controller.
• Stroke is field-adjustable to 90 or 160 degrees.

Product Specifications

Dimensions (in.)6.45 in high x 5.5 in wide x 7.3 in deepDimensions (mm)164 mm high x 140 mm wide x 185 mm deepItem TypeProductFrequency50 Hz; 60 HzApprovals, Underwriters Laboratories Inc.Listed: File No. E4436, Guide No. XAPX for USA and CanadaSupply Voltage24 VacPower Consumption15 WTiming90 degree stroke-- 30 seconds, 160 degree stroke-- 60 secondsAmbient Temperature Range (F)-40 F to +150 FAmbient Temperature Range (C)-40 C to +66 CInput Signal135 ohmInternal Auxiliary Switch1Auxiliary Switch Ratings120 Vac-- 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac-- 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contactStrokeAdjustable; 90 to 160 degrees, SymmetricalShaft Dimensions (in.)double-ended, 3/8 in. squareTorque Rating (lb-in.)150 lb-in.Torque Rating (Nm)17 NmAdditional Torque Ratings (lb-in.)Breakaway-- 300 lb-in.Additional Torque Ratings (Nm)Breakaway-- 34.0 NmAuxiliary Switch Setting7 degreesFactory Stroke Setting90 degreesShaft Dimensions (mm)double-ended, 9.5 mm squareDeadweight Load on ShaftEither End-- 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts);